PT Millenium Muda Mandiri

PT Millenium Muda Mandiri is a recruitment and consulting company
that specializes in placement of Indonesian skilled workers in
Hospitality (Hotel, Cruise Line & Restaurant), Healthcare & Medical, Oil
& Gas, Construction, and Retail Industry through out the Gulf region,
Far East Asia, Europe and still expanding fast to other parts of the
world.

Our Client from Dubai Electricity & Water Authority (DEWA) is looking
for Professional Candidates Engineer to fill the following vacancies in
Dubai:
1. Manager–Electrical Maintenance

QUALIFICATIONS:
Post Graduate / Graduate in Electrical Engineering, max. graduated on
1994
· Minimum 15 years experience in maintenance of electrical
equipment in an electrical power plant / industry for a graduate and 8
years for a post graduate, of which at least 4 years should be in a
similar responsible position.

· Shall be responsible for proactive & reliability centered
maintenance of electrical equipment and systems installed in a modern
GT/ST power and desalination plant.

· Should be able to plan & schedule all maintenance activities
with cost effective inventory management and prepare & control budgetary
provisions.

· Good co-coordinating, organizing, planning & communication
skills are required.

· Should have in depth knowledge of all electrical equipment
of a power plant, sequence controls & protections and exposure to
Quality, Safety & Environment Management Systems, Root Cause Analysis &
computer-aided maintenance techniques.

2. Foreman- Electrical Maintenance

QUALIFICATIONS:
Diploma in Electrical Engineering, max. graduated on 2002
· Minimum 7 years hands on experience in maintenance of
electrical equipment in power stations or process industry.

· Shall be able to supervise, guide and execute routine,
breakdown and overhaul maintenance jobs of electrical equipment like
Generators, Transformers, LV/HV Motors, Switchgear, EOT Cranes,
Batteries, Chargers & Inverters and etc. Knowledge of sequence controls,
wiring, schematic drawings & safe work procedures is required.

3. Engineer/ Senior Engineer–Electrical Maintenance

QUALIFICATIONS:
Post Graduate / Graduate in Electrical Engineering, max. graduated on
1997
· Minimum 12 years experience in maintenance of electrical
equipment in an electrical power plant / industry for a graduate and 8
years for a post graduate, of which at least 4 years should be in a
similar responsible position.

· Shall be responsible for proactive & reliability centered
maintenance of electrical equipment and systems installed in a modern
GT/ST power and desalination plant.

· Should be able to plan & schedule all maintenance activities
with cost effective inventory management and prepare & control budgetary
provisions.

· Good co-coordinating, organizing, planning & communication
skills are required.

· Should have in depth knowledge of all electrical equipment
of a power plant, sequence controls & protections and exposure to
Quality, Safety & Environment Management Systems, Root Cause Analysis &
computer-aided maintenance techniques.

4. Assistant Engineer- Electrical Maintenance

QUALIFICATIONS:
Post Graduate / Graduate in Electrical Engineering, max. graduated on
2004
· Minimum 5 years for graduate & 3 years for postgraduate
candidate having experience of maintenance of electrical equipment in an
electrical power plant or process industry.

· Shall be responsible for supervising reliability- centered
maintenance of equipments like Generators, Transformers, HV & LV motors,
switchgears, EOT Cranes, Batteries and Chargers & Inverters.

· Good co-coordinating and communication skills are required.
A very good computer cognizance is preferred.

5. SENIOR POWER STATION OPERATOR

QUALIFICATIONS:

Degree / Diploma in Engineering (Mech./Elect. /Power), max. graduated on
2006

· AGE – Not more than 35 years

· Minimum 2 – 5 years experience in operation of a modern
gas/thermal power & desalination station.

· The applicant shall be well versed in power / desalination
plant operations through DCS system.

· Responsible for monitoring and operating the plant /
equipment from the central control boards and optimize plant operation.

· Responsible for satisfactory operation of the assigned plant
(Boiler, Turbine, Generator and Desalination Plant) with the appointed
crew.

· Supervise, instruct and co-ordinate with the assigned crew
efficiency and effectively fulfill their job functions and assignments.

· Check and review the operating conditions and records in
order to investigate the weak and troublesome point in advance of any
occurrence.

· Maintain the operating equipment and facilities in sound and
clean condition.

· Maintain detailed operation logs for all operation
activities.

· Carry out isolation of the equipment for planned and
emergency maintenance and normalization of the plant thereafter.

· Follow safety rules and ensure close adherence to the
safety, environment and quality requirements. Should be willing to work
in shifts

6. POWER STATION OPERATOR

QUALIFICATIONS:

Degree / Diploma in Engineering (Mech./Elect. /Power), max. graduated on
2006

· AGE – Not more than 30 years

· Minimum 2 – 5 years experience in operation of a modern
gas/thermal power & desalination station.

· The applicant shall be well versed in power / desalination
plant operations through DCS system.

· Responsible for monitoring and operating the plant /
equipment from the central control boards and optimize plant operation.

· Responsible for satisfactory operation of the assigned plant
(Boiler, Turbine, Generator and Desalination Plant) with the appointed
crew. Supervise, instruct and co-ordinate with the assigned crew
efficiency and effectively fulfill their job functions and assignments.

· Check and review the operating conditions and records in
order to investigate the weak and troublesome point in advance of any
occurrence.

· Maintain the operating equipment and facilities in sound and
clean condition.

· Maintain detailed operation logs for all operation
activities.

· Carry out isolation of the equipment for planned and
emergency maintenance and normalization of the plant thereafter.

· Follow safety rules and ensure close adherence to the
safety, environment and quality requirements. Should be willing to work
in shifts.

7. SENIOR ENGINEER - I&C MAINT.

QUALIFICATIONS:

B.Sc in Electrical / Electronics / Instrument Engineer, max. graduated
on 2004

· 5 – 10 years experience in diagnostic check,
troubleshooting and maintenance of instrumentation and control in Power
plant.

· Through understanding of Control Loops.

· Field instruments and Control Actuator, Calibration and
Maintenance, Knowledge and working experience on different control
system such as DCS, PLC, Fire Fighting System.

· Practical experience in ABB PROCONTROL P-13 / P–14 / PMS
& POS, GE –-Speedtronic Mark – VI, ABB DCS – INFI – 90 /
Symphony, Siemens DCS- Teleperm – ME / Teleperm – XP, Simadyn
– D Controller, Toshiba DCS TOSMAP, PLC SIAMTIC –S5 / S7,
CEGELEC PLC, Allen bardley PLC, HIMA PLC.

· Fire fighting and detection system Minimax / Simplex
capability.

· Self motivated, ability to work under pressure, good
supervisory and reporting correspondences.

· Awareness of personnel and equipment safety standard,
Environmental protection standard and Quality management system.

8. ENGINEER - I&C MAINT.

QUALIFICATIONS:

B.Sc in Electrical / Electronics / Instrument Engineer, max. graduated
on 2004

· 5 – 10 years experience in diagnostic check,
troubleshooting and maintenance of instrumentation and control in Power
plant.

· Through understanding of Control Loops.

· Field instruments and Control Actuator, Calibration and
Maintenance, Knowledge and working experience on different control
system such as DCS, PLC, Fire Fighting System.

· Practical experience in ABB PROCONTROL P-13 / P–14 / PMS
& POS, GE –-Speedtronic Mark – VI, ABB DCS – INFI – 90 /
Symphony, Siemens DCS- Teleperm – ME / Teleperm – XP, Simadyn
– D Controller, Toshiba DCS TOSMAP, PLC SIAMTIC –S5 / S7,
CEGELEC PLC, Allen bardley PLC, HIMA PLC.

· Fire fighting and detection system Minimax / Simplex
capability.

· Self motivated, ability to work under pressure, good
supervisory and reporting correspondences.

· Awareness of personnel and equipment safety standard,
Environmental protection standard and Quality management system.

9. ASSISTANT ENGINEER - I&C MAINT.

QUALIFICATIONS:

B.Sc in Electrical / Electronics / Instrument Engineer, max. graduated
on 2004

· 5 – 10 years experience in diagnostic check,
troubleshooting and maintenance of instrumentation and control in Power
plant.

· Through understanding of Control Loops.

· Field instruments and Control Actuator, Calibration and
Maintenance, Knowledge and working experience on different control
system such as DCS, PLC, Fire Fighting System.

· Practical experience in ABB PROCONTROL P-13 / P–14 / PMS
& POS, GE –-Speedtronic Mark – VI, ABB DCS – INFI – 90 /
Symphony, Siemens DCS- Teleperm – ME / Teleperm – XP, Simadyn
– D Controller, Toshiba DCS TOSMAP, PLC SIAMTIC –S5 / S7,
CEGELEC PLC, Allen bardley PLC, HIMA PLC. Fire fighting and detection
system Minimax / Simplex capability.

· Self motivated, ability to work under pressure, good
supervisory and reporting correspondences.

· Awareness of personnel and equipment safety standard,
Environmental protection standard and Quality management system.

10. I&C FOREMAN

QUALIFICATIONS:

Diploma in Electronics, Instrumentation & Control or Electrical
Engineer, max. graduated on 2002

· Minimum 7 years experience in Power and Desalination Plant
Instrumentation & Control System.

· Carry out of the repair and maintenance work of all types of
field instruments such as temperature, pressure, level, vibration,
speed, flame detectors, transmitters, switches, gauges, recorders and
analyzers.

· Calibration and maintenance of various types of control
actuators e.g. Hydraulic, pneumatic and motorized control valves.

· Work experience of various types of workshop test equipment.

· Supervision ability and guidance of work crafts and
reporting capability. Self motivated and can work under pressure.

· Should have awareness of personnel and equipment safety such
as PLC, DCS and through understanding of control loops.

11. SR. Engineer Mechanical Maintenance (Steam Turbine)

QUALIFICATIONS:

Diploma in Electronics, Instrumentation & Control or Electrical
Engineer, max. graduated on 2002

· Minimum 7 years experience in Power and Desalination Plant
Instrumentation & Control System.

· Carry out of the repair and maintenance work of all types of
field instruments such as temperature, pressure, level, vibration,
speed, flame detectors, transmitters, switches, gauges, recorders and
analyzers.

· Calibration and maintenance of various types of control
actuators e.g. Hydraulic, pneumatic and motorized control valves.

· Work experience of various types of workshop test equipment.

· Supervision ability and guidance of work crafts and
reporting capability. Self motivated and can work under pressure.

· Should have awareness of personnel and equipment safety such
as PLC, DCS and through understanding of control loops.
12. Engineer Mechanical Maintenance (Steam Turbine)
QUALIFICATIONS
Degree in Mechanical Engineering, max. graduated on 1999

· Candidate must have minimum 10-12 years experience in a
large Power Station.

· Must have worked as a Maintenance Engineer involving
routine, preventive and breakdown maintenance of a Medium and heavy duty
Steam Turbines, Back pressure steam turbines, power pumps, NG gas
compressor etc.

· Should be well experienced in the overhaul/Major/ Minor
inspections of Steam Turbines and its auxiliaries.

· Should-have- capability of effectively plan, Monitor
overhauls schedule to achieve high-reliability and efficiency of the
plant.

· Should have experience in troubleshooting of the equipment
malfunctions and finalize short term/ long-term corrective actions.

· Should have adequate writing/communicati on skills to prepare
reports, tender specifications, contract documents etc.

· Shall be responsible for preparation of maintenance budget,
control and effective utilization of the same.

· Should have experience in spare parts planning, purchase and
inspection activities.

· Should have good knowledge of computerized Maintenance
management system.

· Should have good knowledge of Safety, OHSAS and ISO
standards.

13. SR. Engineer Mechanical Maintenance (Boiler)
QUALIFICATIONS
Degree in Mechanical Engineering, max. graduated on 1999

· Candidate must have minimum 10-12 years experience in a
large Power Station.

· Must have worked as a Maintenance Engineer involving
routine, preventive and breakdown maintenance of a High pressure
Boilers, Heat recovery boilers( NG/LFO firing),High pressure valves,
Control valves, Safety Valves, High Pressure piping ,Drum , Burner duct,
Diverter Damper ,Boiler tubes /header etc..

· Should be well experienced in the overhaul/Major inspection
and trouble shooting of Power /Heat recovery boilers and it's
auxiliaries.

· Should-have- capability of effectively plans. Monitor
overhauls schedule to achieve high-reliability and efficiency of the
plant.

· Should have experience in high pressure welding and NDT test
applicable in Boiler Tubes and headers.

· Should have adequate writing/communicati on skills to prepare
reports, tender specifications, contract documents maintenance budget,
control and effective utilization of the same.

· Having knowledge of standards and practices applicable to
Boiler plant equipments will be added advantage.

· Should have good knowledge of computerized Maintenance
Management system Safety, OHSAS and ISO standards etc.

14. Engineer Mechanical Maintenance (Boiler)
QUALIFICATIONS
Degree in Mechanical Engineering, max. graduated on 1999

· Candidate must have minimum 10-12 years experience in a
large Power Station.

· Must have worked as a Maintenance Engineer involving
routine, preventive and breakdown maintenance of a High pressure
Boilers, Heat recovery boilers( NG/LFO firing),High pressure valves,
Control valves, Safety Valves, High Pressure piping ,Drum , Burner duct,
Diverter Damper ,Boiler tubes /header etc.

· Should be well experienced in the overhaul/Major inspection
and trouble shooting of Power /Heat recovery boilers and its
auxiliaries.

· Should-have- capability of effectively plans.

· Monitor overhauls schedule to achieve high-reliability and
efficiency of the plant.

· Should have experience in high pressure welding and NDT test
applicable in Boiler Tubes and headers.

· Should have adequate writing/communicati on skills to prepare
reports, tender specifications, contract documents maintenance budget,
control and effective utilization of the same.

· Having knowledge of standards and practices applicable to
Boiler plant equipments will be added advantage.

· Should have good knowledge of computerized Maintenance
Management system Safety, OHSAS and ISO standards etc.

15. SR. Engineer Mechanical Maintenance (Gas Turbine)
QUALIFICATIONS
Degree in Mechanical Engineering, max. graduated on 1999

· Candidate must have minimum 10-12 years experience in a
large Power Station.

· Must have worked as a Maintenance Engineer involving
routine, preventive and breakdown maintenance of a Gas Turbines and its
auxiliaries. (Preferably Siemens/General Electric Gas Turbines)

· Should be well experienced in the
overhaul/Major/ Minor/Annual inspection of Gas Turbines and Its
auxiliaries.

· Should-have- capability of effectively plan, Monitor
overhauls schedule to achieve high-reliability and efficiency of the
plant.

· Should have experience in troubleshooting of the equipment
malfunctions and finalize short term/ long-term corrective actions.

· Should have adequate writing/communicati on skills to prepare
reports, tender specifications, contract documents etc.

· Responsible for preparation of maintenance budget, control
and effective utilization of the same.

· Should have experience in spare parts planning, purchase and
inspection activities.

· Should have good knowledge of computerized Maintenance
management system.

· Should have good knowledge of Safety, OHSAS and ISO
standards.

· Shall be a capable of managing Major/minor overhauls and
routine maintenance effectively.

16. Engineer Mechanical Maintenance (Gas Turbine)
QUALIFICATIONS
Degree in Mechanical Engineering, max. graduated on 1999

· Candidate must have minimum 10-12 years experience in a
large Power Station. He

· Must have worked as a Maintenance Engineer involving
routine, preventive and breakdown maintenance of a Gas Turbines and its
auxiliaries. (Preferably Siemens/General Electric Gas Turbines)

· Should be well experienced in the
overhaul/Major/ Minor/Annual inspection of Gas Turbines and Its
auxiliaries.

· Should-have- capability of effectively plan, Monitor
overhauls schedule to achieve high-reliability and efficiency of the
plant.

· Should have experience in troubleshooting of the equipment
malfunctions and finalize short term/ long-term corrective actions.

· Should have adequate writing/communicati on skills to prepare
reports, tender specifications, contract documents etc.

· Responsible for preparation of maintenance budget, control
and effective utilization of the same.

· Should have experience in spare parts planning, purchase and
inspection activities.

· Should have good knowledge of computerized Maintenance
management system.

· Should have good knowledge of Safety, OHSAS and ISO
standards.

· Shall be a capable of managing Major/minor overhauls and
routine maintenance effectively.

17. SR. Engineer Mechanical Maintenance (Desalination)
QUALIFICATIONS
Degree in Mechanical Engineering, max. graduated on 1999

· Candidate must have minimum 10-12 years experience in a
large Power Station.

· Must have worked as a Maintenance Engineer involving
routine, preventive and breakdown maintenance of a of the Desalination
plant of MSF technology, including sea water system, DM water plant,
verticals pumps ( BBD/BRP,SEA WATER pumps).

· Should-have- capability of effectively plan, Monitor
overhauls/Annual schedule to achieve high-reliability and efficiency of
the Desalination plants.

· Should have experience in troubleshooting of the equipment
malfunctions and finalize short term/ long-term corrective actions.

· Knowledge of Corrosion technology, including selection of
material for different application will have added advantage.

· Should have adequate writing/communicati on skills to prepare
reports, tender specifications, contract documents etc.

· Responsible for preparation of maintenance budget, control
and its effective utilization of it.

· Must have a good knowledge of standards and practices
applicable to Desalination plant equipments.

· Should have experience in spare parts planning, purchase,
inspection activities, computerized Maintenance management system,
Safety, OHSAS and ISO standards.

18. Engineer Mechanical Maintenance (Desalination)
QUALIFICATIONS
Degree in Mechanical Engineering, max. graduated on 1999

· Candidate must have minimum 10-12 years experience in a
large Power Station.

· Must have worked as a Maintenance Engineer involving
routine, preventive and breakdown maintenance of a of the Desalination
plant of MSF technology, including sea water system, DM water plant,
verticals pumps ( BBD/BRP,SEA WATER pumps).

· Should-have- capability of effectively plan, Monitor
overhauls/Annual schedule to achieve high-reliability and efficiency of
the Desalination plants.

· Should have experience in troubleshooting of the equipment
malfunctions and finalize short term/ long-term corrective actions.
Knowledge of Corrosion technology, including selection of material for
different application will have added advantage.

· Should have adequate writing/communicati on skills to prepare
reports, tender specifications, contract documents etc.

· Responsible for preparation of maintenance budget, control
and its effective utilization of it. Suitable candidate must have a good
knowledge of standards and practices applicable to Desalination plant
equipments. Should have experience in spare parts planning, purchase,
inspection activities, computerized Maintenance management system ,
Safety, OHSAS and ISO standards.

19. Asst. Engineer (Mechanical Maintenace)

QUALIFICATIONS

Degree in Mechanical Engineering, max. graduated on 2003

· 6-8 years experience for degree/Diploma holders.

· Should have worked in a large Power Station of large
Petrochemical, Fertilizer factory as a Maintenance Engineer responsible
for routine, preventive and breakdown maintenance of a large Power
Steam/Gas Turbines, Boilers, and Large Pumps etc.

· Should have experience in overhaul Major Inspection of Steam
or Gas Turbines.

· Should have capability to effectively plan, schedule, and
supervise work with highest reliability and productivity.

· Should have experience in troubleshooting equipment
malfunctions and select corrective actions.

· Should have adequate writing skills to prepare reports and
written documents- shall have a good knowledge of standards and
practices applicable to power plant equipment

· Should have experience in spare parts planning, purchase and
inspection activities.

· Should have knowledge in using computerized Maintenance
management system effectively over and above good computer use
experience.

· Shall ensure good safety practices in work.

20. Foreman (Mechanical Maintenance)

QUALIFICATIONS

Diploma in Mechanical Engineering, max. graduated on 2003

· 6-8 years experience in a large power station or similar
field like refinery, petrochemical or fertilizer plant.

· Shall have experience in overhaul or major inspection of a
large Steam / Gas Turbines, pumps, compressors, boilers, high pressure
valves, etc. S

· Shall have knowledge of international standards on material
and machinery fit standard, tolerances.

· Shall have basic knowledge of ND tests. Shall have
experience in planning, scheduling and execution overhaul work.

· Shall have leadership qualities to lead a team of
professional technicians for timely and quality work execution.

· Should have experience in computer use for data entry and
analysis using a maintenance management system software

· Shall have experience in Pipeline fabrication and or
overhaul of large vertical and multistage pumps.

· Should have good experience with renowned maintenance /
refurbishment contractors

· Should be safety conscious.

21. Senior Mechanic

QUALIFICATIONS

Higher Secondary School Certificate followed by Trade School
Certificate- Apprenticeship / on job training in power station or
continuous process Industry.

· Minimum 8 years experience in maintenance and overhaul of
large Steam Turbines and / or Major Inspection of Industrial Gas
Turbines.

· Have experience in Overhaul of Large vertical pumps, Power
boilers, Multi stage high-pressure pumps etc.

· Capable of independently handling the work allocated to him
on overhaul of the equipment referred to above.

· Shall have a fair knowledge of the rigging of parts of large
machines and various measuring instruments and precision tools.

· Shall have capability to align turbine to generator.

· Shall be able to read and understand machine drawings and
should be familiar with fits and tolerances in assembly of machinery.

· Should be able to converse English language.

General skills and qualifications required:

- Male, Age between 30 – 45 years old.

- Must have excellent spoken and written in English, other language
is highly desirable.

- Working Reference and Computer literate

- A self starter, energetic, good personality, highly motivated and
inspirational

- Have excellent communication skills

- Ability to work independently and good team work.

SERIOUS CANDIDATES MEETING ABOVE CRITERIA AND WITH VALID PASSPORT,
WILLING TO SUBMIT IT ONCE SHORTLISTED FOR INTERVIEW NEED ONLY APPLY
IMMEDIATELY.

Please send the necessary documents at the earliest before September 25,
2009 to:

HRD & GA Division

PT Millenium Muda Mandiri

Menara Hijau, 14th Floor SUITE #1406

Jl. MT Haryono Kav. 33

Jakarta 12700

trainingcentre@ milleniummudaman diri.com


admin1@milleniummud amandiri. com